300-415 Practice Test Free – 50 Questions to Test Your Knowledge
Are you preparing for the 300-415 certification exam? If so, taking a 300-415 practice test free is one of the best ways to assess your knowledge and improve your chances of passing. In this post, we provide 50 free 300-415 practice questions designed to help you test your skills and identify areas for improvement.
By taking a free 300-415 practice test, you can:
- Familiarize yourself with the exam format and question types
- Identify your strengths and weaknesses
- Gain confidence before the actual exam
50 Free 300-415 Practice Questions
Below, you will find 50 free 300-415 practice questions to help you prepare for the exam. These questions are designed to reflect the real exam structure and difficulty level.
Which application list is preconfigured?A. Cisco_Apps
B. P2P_Apps
C. Microsoft_Office365
D. Google_Apps
DRAG DROP
-
Drag and drop the steps from the left into the sequence on the right for a WAN Edge router after powering on for zero touch provisioning.
The application team is getting ready to deploy a new business-critical application to the network. To protect the traffic, the network team must add another queue to the QoS map and then deploy the map to the fabric. Which configuration step must be completed prior to adding the queue to the QoS map and applying it?A. The relationship between the new QoS class and the hardware queue must be configured from the "lists" page of the Local Policy section of vManage. The QoS map is then applied to the WAN interface.
B. The relationship between the new QoS class and the hardware queue must be configured from the "lists" page of the Local Policy section of vManage. The QoS map is then applied to the service-side interface.
C. The relationship between the new QoS class and the hardware queue must be configured from the "lists" page of the Centralized Policy section of vManage. The QoS map is then applied to the service-side interface.
D. The relationship between the new QoS class and the hardware queue must be configured from the "lists" page of the Centralized Policy section of vManage. The QoS map is then applied to the WAN interface.
Which type of service provider is responsible for secure, private connections between data centers, access regions, and cloud providers in Cisco SD-WAN Multi-Region Fabric?A. distributed network providers
B. middle-mile network providers
C. last-mile network providers
D. first-mile network providers
Refer to the exhibit. The SD-WAN network is configured with a default full-mesh topology. The SD-WAN engineer wants the Barcelona WAN Edge to use the MPLS TLOC as the preferred TLOC when communicating with the Rome site. Which configuration must the engineer use to create a list to select MPLS color toward the Rome TLOC?A.
B.
C.
D.
DRAG DROP
-
Drag and drop the phases of TrustSec from the left onto the targets on the right. Not all options are used.
Refer to the exhibit. A user has selected the options while configuring a VPN Interface Ethernet feature template. What is the required configuration parameter the user must set in this template for this feature to function?A. The "Shaping Rate (Kbps)" field must be configured with a value.
B. The "IP MTU" field must be increased from the default value of 1500 to support the additional overhead.
C. The "Bandwidth Downstream" field must be configured with a value.
D. The "Adaptive QoS" field must be set to "on".
Which SD-WAN devices require multicast PIM and IGMP configurations when setting up SD-WAN multicast?A. datacenter replicator devices
B. datacenter devices with multicast sources
C. branch devices with multicast receivers
D. branch devices with unicast traffic
An engineer is modifying an existing data policy for VPN 115 to meet these additional requirements:
• When browsing government websites, the traffic must use direct internet access.
• The source address of the traffic leaving the site toward the government websites must be set to an IP range associated with the country itself, a particular TLOC.
The policy configuration is as follows:
A.
B.
C.
D.
What problem happens on a device with two serial numbers, a unique device identifier (UDI), and a secure unique device identifier (SUDI) when an engineer provisions ISR 4000 by PnP using only a UDI?A. It faces interface buffer overflow problems.
B. It encounters memory overload problems.
C. It encounters spanning tree issues.
D. It encounters redirection problems.
What is a key element used in a vBond Orchestrator redundancy topology?A. load-balancer with health probes
B. DHCP server
C. fully qualified domain name
D. stun server
What is one way an SD-WAN Edge router originates a vRoute?A. learned from OSPF intra-area
B. learned from BGP
C. from TLOCs connected to the WAN transports
D. from the vBond controller
Which signature sets are available in vManage under the security policy configuration for IPS?A. Connectivity, Balanced, Security
B. Malware, Blacklist, Connectivity
C. Malware, Security, Connectivity
D. Blacklist, Balanced, Security
Which Cisco SD-WAN configuration provides the advantages of day-zero deployment and reusable configuration components?A. configuration groups
B. configuration via the vBond controller
C. configuration through a Cisco Prime server
D. CLI-based templates
What is the role of the Session Traversal Utilities for NAT server provided by the vBond orchestrator?A. It prevents SD-WAN Edge routers from forming sessions with public transports among different service providers.
B. It facilitates SD-WAN Edge routers to stay behind a NAT-enabled firewall while the transport addresses of the SD-WAN controller are unNAT-ed.
C. It allows WAN Edge routers to form sessions among MPLS TLOCs using only public IP addresses.
D. It facilitates SD-WAN routers and controllers to discover their own mapped or translated IP addresses and port numbers.
How many network interface cards are needed to add in virtual machine settings when installing vSmart controller on VMware vSphere ESXi Hypervisor software?A. 1
B. 2
C. 3
D. 4
What is the purpose of a TLOC extension interface?A. gives access to business Internet
B. provides access to the transport of its neighboring WAN Edge router
C. forms an alternate connection to connected transport
D. synchronizes the configuration with the neighboring WAN Edge router
Which REST API call is used for real-time monitoring of application-aware routing?A. history
B. SLA class
C. event
D. alarm
Which protocol runs between the vSmart controllers and WAN Edge routers when the vSmart controller acts like a route reflector?A. IPsec inside the DTLS/TLS control connection
B. BGP inside the DTLS/TLS
C. OMP outside the DTLS/TLS control connection
D. OMP inside the DTLS/TLS control connection
Which protocol does vManage use to provision the WAN Edge device during the onboarding process?A. RESTCONF
B. NETCONF
C. EPP
D. HTTPS
What is the BFD multiplier in application-aware routing?A. 6
B. 7
C. 8
D. 9
Which platform is a Cisco SD-WAN virtual platform?A. Cisco ASR 1000
B. Cisco Nexus 1000V
C. Cisco CSR 1000V
D. Cisco ISR 4000
A customer has two branch sites with overlapping IPs. How must the data policy be configured to establish communication between the sites and server to avoid overlapping?A.
B.
C.
D.
Which configuration allows VPN 10 traffic to have direct internet access locally from the WAN Edge device?A.
B.
C.
D.
What is a requirement for deployment of on-premises vBond controllers through the Cisco Plug and Play Connect process?A. a defined controller profile
B. a DNS name that identifies vBond
C. Internet connectivity from vManage
D. a CSV file that contains all controllers
How is vBond reachability resolved by vManage?A. IPsec
B. DNS
C. BGP
D. OMP
How many cloud gateway instance(s) can be created per region when provisioning Cloud OnRamp for Multicloud from AWS in a multiregion environment?A. one
B. two
C. three
D. four
What is the result during a WAN Edge software upgrade process if the version of the WAN Edge software is higher than the one running on a controller device?A. The upgrade button is greyed out.
B. The upgrade fails with a warning message.
C. The upgrade proceeds with a warning message.
D. The upgrade proceeds with no warning message.
What does forward error correction addresses in Cisco SD-WAN?A. reduced application performance degradation related to service degradation
B. applications with occasional invalid data input and poor performance
C. traffic flows with increased delay over a particular transport
D. inefficient traffic forwarding caused by inbound shapers
Which process is continued by Cisco SD-WAN when packet duplication is enabled?A. Additional headers are added to outgoing packets to perform custom routing policies.
B. Dynamic traffic is compressed and signaled before it is forwarded though the WAN.
C. Copies of packets are sent over multiple WAN circuits to overcome packet loss.
D. Application traffic is analyzed to find patterns and enable custom detection rules.
What is the function of the AppNav Controller in the Cisco SD-WAN AppNav solution?A. It provides information about configured optimization policies on SD-WAN edge devices.
B. It accelerates specific traffic based on preconfigured policies.
C. It intercepts and distributes network traffic based on configured policies.
D. It provides configuration and monitoring for WAAS nodes.
Which set of platforms must be in separate VMs as of release 16.1?A. vManage and vSmart
B. vSmart and WAN Edge
C. vBond and vSmart
D. WAN Edge and vBond
DRAG DROP
-
Drag and drop key features from the left onto the corresponding firewall type on the right.
Which two advanced security features are available on the Cisco SD-WAN WAN Edge (vEdge) device? (Choose two.)A. Cisco Umbrella DNS Security
B. Enterprise Firewall
C. snort intrusion prevention system
D. Cisco AMP and AMP Threat Grid
E. URL filtering
What are three types of data that JSON uses when Cisco APIC REST API uses JavaScript?A. GET, PUT, and DELETE
B. SCALAR, OBJECT, and ARRAY
C. GET, PUT, and POST
D. SCALAR, POST, and OBJECT
Refer to the exhibit. A WAN Edge router is configured with SLAs. Which TLOC does the traffic take if the internet TLOC has latency 100 ms, loss 2%, jitter 50ms, and the MPLS TLOC has latency 50 ms, loss 1%, and jitter 150 ms?A. MPLS
B. internet
C. MPLS or internet
D. drop
Which two types of SGT propagation are supported by Cisco TrustSec? (Choose two.)A. key chain
B. offline tagging
C. SXP
D. reconciliation
E. inline tagging
An engineer configured a data policy called ROME-POLICY. Which configuration allows traffic flow from the Rome internal network toward other sites?A.
B.
C.
D.
Which configuration component is used in a firewall security policy?A. intrusion prevention policy
B. numbered sequences of match-action pairs
C. application match parameters
D. URL filtering policy
DRAG DROP
-
Drag and drop the steps from the left into the order on the right to delete a software image for a WAN Edge router starting with Maintenance > Software Upgrade > Device list on vManage.
Which capability does Cisco SD-WAN Multi-Region Fabric provide?A. end-to-end SLA-aware routing
B. overlay support for IP multicast
C. assignment of a single vSmart controller to handle region 0 and noncore regions
D. end-to-end encryption for inter-region traffic
How do WAN Edge devices operate when vSmart is inaccessible or fails to be reached by the WAN Edge?A. They continue operation normally.
B. They continue operating normally for a configurable time.
C. They continue to receive reachability updates.
D. They cease to forward traffic in the data plane.
What is the size of SGT data in the metadata header?A. 8 bits
B. 16 bits
C. 24 bits
D. 32 bits
A network engineer sets tags in OMP for routes that were originated in the Service VPN. Which monitoring tab must be used to verify tags on the next hop?A. Troubleshooting > Simulate Flows
B. Realtime > OMP Received TLOCs
C. Troubleshooting > Tunnel Health
D. Realtime > OMP Received Routes
What are the two advantages of configuration groups in a Cisco SD-WAN deployment? (Choose two.)A. An individual device has multiple tag rules.
B. Individual devices are grouped based on a shared configuration.
C. Individual devices are added to multiple groups.
D. A subset of devices is identified with tags.
E. Individual devices are associated with a configuration group and a device template.
Which controller is used for provisioning and configuration in a Cisco SD-WAN solution?A. vManage
B. vBond
C. WAN Edge router
D. vSmart
Drag and drop the vManage policy configuration procedures from the left onto the correct definitions on the right.Select and Place:
Drag and drop the attributes from the left that make each transport location unique onto the right. Not all options are used.Select and Place:
Drag and drop the policies from the left onto the policy types on the right.Select and Place:
Drag and drop the actions from the left into the correct sequence on the right to create a data policy to direct traffic to the Internet exit.Select and Place:
Get More 300-415 Practice Questions
If you're looking for more 300-415 practice test free questions, click here to access the full 300-415 practice test.
We regularly update this page with new practice questions, so be sure to check back frequently.
Good luck with your 300-415 certification journey!