An engineer must configure interface and sensor monitoring on a router. The NMS server is located in a trusted zone with IP address 10.15.2.19. Communication between the router and the NMS server must be encrypted and password-protected using the most secure algorithms. Access must be allowed only for the NMS server and with the minimum permission levels needed. Which configuration must the engineer apply?

A. ip access-list extended nms
permit 1 host 10.15.2.19 any
snmp-server view ro internet included
snmp-server view ro ifEntry included
snmp-server group nms v3 priv notify ro access nms
snmp-server user user1 nms v3 encrypted auth md5 Password1 pri 3des Password123

B. ip access-list standard nms
permit 10.15.2.19 0.0.0.0
snmp-server view ro iso included
snmp-server view ro ifEntry included
snmp-server group nms v3 priv read ro access nms
snmp-server user user1 nms v3 auth sha Password1 pri aes 256 Password123

C. ip access-list standard nms
permit 10.15.2.19 0.0.0.0
snmp-server view rw iso included
snmp-server view rw ifEntry included
snmp-server group nms v3 auth write rw access nms
snmp-server user user1 nms v3 auth des Password1 pri des Password123

D. ip access-list standard nms
permit 10.15.2.19 255.255.255.255
snmp-server view ro iso included
snmp-server view ro ifEntry included
snmp-server group nms v3 priv read ro access nms
snmp-server user user1 nms v3 auth 3des Password1 pri aes 192 Password123










Correct Answer: B

This question is in 350-401 Implementing Cisco Enterprise Network Core Technologies (ENCOR) Exam exam
For getting CCNP Enterprise Certificate

Disclaimers:
The website is not related to, affiliated with, endorsed or authorized by Cisco.
Trademarks, certification & product names are used for reference only and belong to Cisco.
The website does not contain actual questions and answers from Cisco's Certification Exam.