SIMULATION
-
Guidelines
-
This is a lab item in which tasks will be performed on virtual devices:
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked the lab closes and cannot be reopened.
Topology
-
Tasks
-
Refer to the topology. All physical cabling is in place. Configure local users accounts, modify the Named ACL (NACL), and configure DHCP Snooping. The current contents of the NACL must remain intact.
Task 1
-
Configure a local account on Gw1 with telnet access only on virtual ports 0-4. Use the following information:
• Username: wheel
• Password: lock3path
• Algorithm type: Scrypt
• Privilege level: Exec mode
Task 2
-
Configure and apply a NACL on Gw1 to control network traffic from VLAN 10:
• Name: CORP_ACL
• Allow BOOTP and HTTPS
• Restrict all other traffic and log the ingress interface, source MAC address, the packet’s source and destination IP addresses, and ports
Task 3
-
Configure Sw1:
• Enable DNCP Snooping for VLAN 10
• Disable DHCP Option-82 data insertion
• Enable DHCP Snooping MAC address verification
• Enable trusted interfaces
Suggested Answer:
This question is in 200-301 Cisco Certified Network Associate (CCNA) Exam
For getting Cisco Certified Network Associate (CCNA) Certificate
Disclaimers:
The website is not related to, affiliated with, endorsed or authorized by Cisco.
Trademarks, certification & product names are used for reference only and belong to Cisco.
The website does not contain actual questions and answers from Cisco's Certification Exam.
