A company is running a pair of Cisco Nexus 7706 Series Switches as part of a data center segment. All network engineers have restricted read-write access to the core switches. A network engineer must add a new FCoE VLAN to allow traffic from servers toward FCoE storage. Which set of actions must be taken to meet these requirements?

A. 1. Assign the network-admin role to a user. 2. Commit the role to the switch to the active user database.

B. 1. Modify a network-operator role and add the required privileges. 2. Assign a VDC-operator role to a user.

C. 1. Create a user-defined role and add the required privileges. 2. Assign a role to a user.

D. 1. Add the required privilege to the VDC-admin role. 2. Commit the changes to the active user database.








 

Suggested Answer: D

User roles contain rules that define the operations allowed for the user who is assigned the role. Each user role can contain multiple rules and each user can have multiple roles. For example, if role1 allows access only to configuration operations, and role2 allows access only to debug operations, then users who belong to both role1 and role2 can access configuration and debug operations. You can also limit access to specific VLANs, virtual routing and forwarding instances (VRFs), and interfaces.
The Cisco NX-OS software provides four default user roles:
ג€¢network-adminג€"Complete read-and-write access to the entire NX-OS device (only available in the default VDC)
ג€¢network-operatorג€"Complete read access to the entire NX-OS device (only available in the default VDC)
ג€¢vdc-adminג€"Read-and-write access limited to a VDC
ג€¢vdc-operatorג€"Read access limited to a VDC
Note: You cannot change the default user roles.
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_nx-os-cfg/sec_rbac.html#wp1431408

This question is in 350-601 DCCOR exam 
For getting CCNP Data Center Certificate


Disclaimers:
The website is not related to, affiliated with, endorsed or authorized by Cisco.
Trademarks, certification & product names are used for reference only and belong to Cisco.