A network engineer must configure a router for Flexible NetFlow IPFIX export. The IP address of the destination server is 172.17.12.1. The source address must be set to the Loopback0 IPv4 address and exported packets must be set to DSCP CS3. The TTL must be 64 and the transport protocol must be set to UDP with destination port 4739. Which configuration must the engineer apply to the router?

A. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 3 ttl 64 export-protocol netflow-v9 transport udp 4739 end

B. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol ipfix end

C. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol netflow-v9 transport udp 4739 end

D. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 3 ttl 64 export-protocol ipfix end








 

Suggested Answer: B



This question is in 350-501 SPCOR exam 
For getting CCNP Service Provider Certificate


Disclaimers:
The website is not related to, affiliated with, endorsed or authorized by Cisco.
Trademarks, certification & product names are used for reference only and belong to Cisco.