An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch. The solution must meet these conditions:
✑ It must use a challenge-response authentication protocol that uses MD5 hashing with an incrementally changing identifier.
✑ The RADIUS configuration must be automatically shared with other MDS switches in the environment.
The RADIUS server is already defined. Which command set completes the configuration?

A. aaa authentication login chap enable radius distribute radius commit

B. aaa authentication login pap enable distribute radius radius-server host 10.8.8.0 auth-port 1821

C. aaa authentication login mschapv2 enable radius propagate radius authentication port 1821

D. aaa authentication login mschap enable radius commit radius-server host 10.8.8.0








 

Suggested Answer: A

Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/security/cisco_mds9000_security_config_guide_8x/
 configuring_security_features_on_external_aaa_server.html#con_2054570

This question is in 350-601 DCCOR exam 
For getting CCNP Data Center Certificate


Disclaimers:
The website is not related to, affiliated with, endorsed or authorized by Cisco.
Trademarks, certification & product names are used for reference only and belong to Cisco.