Refer to the exhibit.
 
A technician has installed SwitchB and needs to configure it for remote access from the management workstation connected to SwitchA.
Which set of commands is required to accomplish this task?

A. SwitchB(config)# ip default-gateway 192.168.8.254 SwitchB(config)# interface vlan 1 SwitchB(config-if)# ip address 192.168.8.252 255.255.255.0 SwitchB(config-if)# no shutdown

B. SwitchB(config)# ip default-network 192.168.8,254 SwitchB(config)# interface vlan 1 SwitchB(config-if)# ip address 192.168.8.252 255.255.255.0 SwitchB(config-if)# no shutdown

C. SwitchB(config)# interface vlan 1 SwitchB(config-if)# ip address 192.168.8.252 255.255.255.0 SwitchB(config-if )# ip default-gateway 192.168.8.254 255.255.255.0 SwitchB(config-if)# no shutdown

D. SwitchB(config)# ip router 192.168.8.254 255.255.255.0 SwitchB(config-if)# interface FastEthernet 0/1 SwitchB(config-if )# ip default-gateway 192.168.8.254 255.255.255.0 SwitchB(config-if)# no shutdown

E. SwitchB(config-if)# interface FastEthernet 0/1 SwitchB(config-if )# ip default-gateway 192.168.8.252 255.255.255.0 SwitchB(config-if)# no shutdown A






 

Suggested Answer: Explanation



This question is in CCNA 200-125 exam 
For getting CCNA Certificate


Disclaimers:
The website is not related to, affiliated with, endorsed or authorized by Cisco.
Trademarks, certification & product names are used for reference only and belong to Cisco.