Scenario -
You have been asked to evaluate how EIGRP is functioning in a customer network. Access the device consoles to answer the questions.
Instructions -
- Enter IOS commands on the device to verify network operation and answer for multiple-choice questions.
- THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
- Click on the individual device icons or use the tab at the bottom of the screen to gain access to the console for each device.
- No console or enable passwords are required.
- To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.
- There are four multiple-choice questions with this task. Be sure to answer all five questions before selecting the Next button.
 
 
 
 
 
 
 
Traffic from R1 to R6s Loopback address is load shared between R1-R2-R4-R6 and R1-R3-R5-R6 paths. What is the ratio of traffic over each path?

A. 1:1

B. 1:5

C. 6:8

D. 19:80








 

Suggested Answer: D

First, find the IP address of the loopback0 interface on R6:
 <img src="https://www.examtopics.com/assets/media/exam-media/02670/n27283900002.png" alt="Reference Image" />
We see that it is 150.1.6.6, so we issue the "show ip route 150.1.6.6" command from R1 and see this:
 <img src="https://www.examtopics.com/assets/media/exam-media/02670/n27283900006.png" alt="Reference Image" />
Notice the "traffic share count" shows 19 for the first path, and 80 for the second path.

This question is in 300-101 Cisco Implementing Cisco IP Routing (ROUTE) Exam
For getting Cisco Certified Network Professional (CCNP) Routing and Switching Certificate




Disclaimers:
The website is not related to, affiliated with, endorsed or authorized by Cisco.
Trademarks, certification & product names are used for reference only and belong to Cisco.
The website does not contain actual questions and answers from Cisco's Certification Exam.