SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. •...

Questions › Category: 200-301 › SIMULATION – Guidelines – This is a lab item in which tasks will be performed on virtual devices • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. •…

0 Vote Up Vote Down

Admin Staff asked 3 months ago

SIMULATION
-
Guidelines
-
This is a lab item in which tasks will be performed on virtual devices
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked the lab closes and cannot be reopened.
Topology
-

Tasks
-
Refer to the topology. All physical cabling is in place. Configure a local user account, a Named ACL (NACL), and security.
Task 1
-
Configure a local account on Sw101 with telnet access only on virtual ports 0-4. Use the following information:
• Username: support
• Password: max2learn
• Privilege level: Exec mode
Task 2
-
Configure and apply a single NACL on Sw101 using the following:
• Name: ENT_ACL
• Restrict only PC2 on VLAN 200 from pinging PC1
• Allow only PC2 on VLAN 200 to telnet to Sw101
• Prevent all other devices from telnetting from VLAN 200
• Allow all other network traffic from VLAN 200
Task 3
-
Configure security on interface Ethernet 0/0 of Sw102:
• Set the maximum number of secure MAC addresses to four.
• Drop packets with unknown source addresses until the number of secure MAC addresses drops below the configured maximum value. No notification action is required.
• Allow secure MAC addresses to be learned dynamically.