What are the default timers for RIPng?

A. Update: 30 seconds Expire: 180 seconds Flush: 240 seconds

B. Update: 20 seconds Expire: 120 seconds Flush: 160 seconds

C. Update: 10 seconds Expire: 60 seconds Flush: 80 seconds

D. Update: 5 seconds Expire: 30 seconds Flush: 40 seconds








 

Suggested Answer: A

Update Timer -
The update timer controls the interval between two gratuitous Response Messages. By default the value is 30 seconds. The response message is broadcast to all its RIP enabled interface.[8]
Invalid Timer -
The invalid timer specifies how long a routing entry can be in the routing table without being updated. This is also called as expiration Timer. By default, the value is 180 seconds. After the timer expires the hop count of the routing entry will be set to 16, marking the destination as unreachable.
Flush Timer -
The flush timer controls the time between the route is invalidated or marked as unreachable and removal of entry from the routing table. By default the value is 240 seconds. This is 60 seconds longer than Invalid timer. So for 60 seconds the router will be advertising about this unreachable route to all its neighbours. This timer must be set to a higher value than the invalid timer.[8]
Hold-down Timer -
The hold-down timer is started per route entry, when the hop count is changing from lower value to higher value. This allows the route to get stabilized. During this time no update can be done to that routing entry. This is not part of the RFC 1058. This is Cisco's implementation. The default value of this timer is 180 seconds.
 
Reference:
http://www.brocade.com/content/html/en/configuration-guide/fastiron-08030b-l3guide/GUID-97023AC1-C034-40EA-B02D-1E3E9DACCAC7.html

This question is in 300-101 Cisco Implementing Cisco IP Routing (ROUTE) Exam
For getting Cisco Certified Network Professional (CCNP) Routing and Switching Certificate




Disclaimers:
The website is not related to, affiliated with, endorsed or authorized by Cisco.
Trademarks, certification & product names are used for reference only and belong to Cisco.
The website does not contain actual questions and answers from Cisco's Certification Exam.